| WARNING - UK POSTAL STRIKE STARTING THURSDAY 4TH UNTIL WEDNESDAY 10TH OCTOBER My online shop remains open during the strike but I may not be able to dispatch until the 10th and delivery times may be extended |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Nigel Lawton 009 - Online Shop - Motors and Mechanism Parts |
| Shipping & Handling to outside the UK. (See note to above) |
| Postage & Packing (P&P) UK ONLY |
 |
| $8.00 |
| IMPORTANT NOTE:- US $ and € CHECKS and Money Orders. (This note does NOT apply to Online payments but is included for those intending to order by mail who may be using this page as a price list.) I can accept checks on USA based banks in $ and European banks in € (Euro) and Wells Fargo international money orders but there is an additional handling charge of $10/€8 to cover the bank charge which these incur (£5). Total S&H $16/€13 for US $ and € checks or Wells Fargo international money orders. Regrettably I am unable to cash other types of non UK currency money order. Note that many US banks will provide a check or money order in £ Sterling drawn on a British bank. There is no additional handling charge for money orders or checks in £ sterling. Mail order standards:- Orders within the UK are sent by first class letter post. Orders to USA, Europe and the rest of the world are sent by small packet airmail. This usually arrives around 1 week to 10 days after the dispatch date. |
 |
 |
| £3.50 |
| £5.00 |
| €6.00 |
 |
 |
 |
| 6 Volt Micro Motor 6mm x 12mm runs on 12V with resistor supplied |
| $12.00 |
| £6.50 |
| €10.00 |
| ¥1,400 |
|
|
| Mini Motor 10mm x 12mm 12V rated |
| £6.50 |
 |
| $12.00 |
| €10.00 |
| ¥1,400 |
| Mini Motor shaft adapter 1mm to 1.5mm x 3mm long. Precision turned. |
| £1.00 |
| $2.00 |
| €1.20 |
| ¥200 |
 |
 |
| Surface mount 150 ohm resistor and PCB pad for 6V Micro Motor |
| $1.00 |
| £0.50 |
| €0.75 |
| ¥100 |
 |
| Micro motor shaft adapter 0.8 mm to 1.5mm x 3mm long. Precision turned |
| £1.00 |
| $2.00 |
| €1.20 |
| ¥130 |
|
| Mini/Midi |
| Micro |
| ¥600 |
|
| 1mm to 1.5mm shaft adapter 20mm long, solid turned brass. |
| $6.00 |
| £4.00 |
| €5.50 |
| ¥700 |
| Micro motor shaft adapter 0.8 mm to 1.0mm with resistor for Marklin locos |
| £4.50 |
| $6.50 |
| €6.00 |
| ¥600 |
|
| Micro 1mm |
| Tenshodo motor bogie gears - 2 brass worms and 2 acetal worm gears 14:1 reduction, 1.5mm worm shaft, 2mm gear shaft |
| $8.00 |
| £5.00 |
| €6.00 |
| ¥600 |
 |
| 4mm OD friction wheel centre with O ring to suit, overall OD around 7mm. Shaft hole 1.5mm |
| $2.00 |
| £1.00 |
| €1.20 |
| ¥200 |
 |
| 5.6mm diameter wheelsets with 1.5mm axles as used in my O&K Montania kit suitable for use as driving wheels |
| $3.50 |
| £2.50 |
| €3.00 |
| ¥300 |
| $2.00 |
| £1.00 |
| €1.20 |
| ¥200 |
|
| Gears |
| 1.5mm to 2mm shaft adapter suitable for mounting the gear from either of the above worm sets on the above wheelsets |
 |
|
|
 |
|
|
|
| 5mm root pulley with 1.5mm shaft hole for use with belts below |
| $1.50 |
| £0.75 |
| €1.00 |
| ¥150 |
| 1.1mm root pulley with 0.8mm shaft hole for use with belts below |
| £1.00 |
| $2.00 |
| €1.20 |
| ¥200 |
| 3mm root pulley with 1.5mm shaft hole for use with belts below |
| £0.75 |
| $1.50 |
| €1.00 |
| ¥150 |
|
| 7.5mm inner diam 0.6mm cross-section square drive belts (3 per pack) |
| $2.00 |
| £1.00 |
| €1.20 |
| ¥200 |
 |
 |
 |
 |
|
| 6.5mm inner diam 0.6mm cross-section square drive belts (3 per pack) |
| $2.00 |
| £1.00 |
| €1.20 |
| ¥200 |
 |
|
| 5.5mm inner diam 0.6mm cross-section square drive belts (3 per pack) |
| $2.00 |
| £1.00 |
| €1.20 |
| ¥200 |
 |
|
| 6 Volt Micro Motor 6mm x 10mm runs on 12V with resistor supplied |
| $12.00 |
| £6.50 |
| €10.00 |
| ¥1,400 |
|
| 5.2mm diameter wheelsets with 1.5mm axles suitable for use as driving wheels |
| $3.50 |
| £2.50 |
| €3.00 |
| ¥300 |
|
|
| 1.2mm root pulley with 1.0mm shaft hole for use with belts below |
| £1.00 |
| $2.00 |
| €1.20 |
| ¥200 |
 |
|
| 1.7mm root pulley with 1.5mm shaft hole for use with belts below |
| £0.75 |
| $1.50 |
| €1.00 |
| ¥150 |
|
| 10mm inner diam 0.6mm cross-section square drive belts (3 per pack) |
| $2.00 |
| £1.00 |
| €1.20 |
| ¥200 |
|
| 12mm inner diam 0.6mm cross-section square drive belts (3 per pack) |
| $2.00 |
| £1.00 |
| €1.20 |
| ¥200 |
| 6 Volt Micro Motor 6mm x 12mm as above with 1.1mm root pulley fitted |
| $16.00 |
| £8.50 |
| €13.00 |
| ¥1,800 |
|
|
| 6 Volt Micro Motor 6mm x 10mm as above with 1.1mm root pulley fitted |
| $16.00 |
| £8.50 |
| €13.00 |
| ¥1,800 |
 |
 |
 |
 |
|
| $3.00 |
| £1.50 |
| €2.00 |
| ¥300 |
| 1.5mm diameter steel shaft 40mm long suitable for lay shafts etc. |
|
| $2.00 |
| £1.00 |
| €1.50 |
| ¥200 |
| 1.5mm diameter steel shaft 30mm long suitable for lay shafts etc. |
|
| $2.00 |
| £1.00 |
| €1.50 |
| ¥200 |
| 1.5mm diameter steel shaft 15mm long suitable for lay shafts etc. |
| 6.3mm diameter wheelsets with 1.5mm axles shaft suitable for use as driving wheels as used in the MPD18 |
| $8.00 |
| £4.00 |
| €5.50 |
| ¥800 |
|
 |
|
|
| 7mm root pulley with 1.5mm shaft hole for use with belts below |
| 9mm root pulley with 1.5mm shaft hole for use with belts below |
| $1.50 |
| £0.75 |
| €1.00 |
| ¥150 |
| $1.50 |
| £0.75 |
| ¥150 |
| US Dollars UK Pounds Euros Yen |
| US Dollars UK Pounds Euros Yen |
| $1.50 |
| £0.75 |
| €1.00 |
| ¥150 |
| Steel worm and brass worm gear. 15:1 reduction, 1.5mm worm shaft, 2mm gear shaft. |
| $5.00 |
| £3.00 |
| €4.00 |
| ¥400 |
| Signed for Shipping & Handling to outside the UK (See note above) |
 |
| $16.00 |
| £10.00 |
|
|
| ¥1200 |
 |
| €13.00 |
|
|
|
|
| Midi Motor 8mm x 16mm runs on 12V with resistor supplied |
| £6.50 |
| $12.00 |
| €10.00 |
| ¥1,400 |
| Midi Motor 8mm x 16mm as above with 1.2mm root pulley fitted. |
| £8.50 |
| $18.00 |
| €13.00 |
| ¥1,800 |
|
 |
 |
 |
 |
 |
 |
| IMPORTANT - Please read this before ordering Please add either the "Postage and Packing (P&P) UK ONLY" item or the "Shipping & Handling to outside the UK"or the "Signed for Shipping & Handling to outside the UK" item to your cart before checking out. Many thanks. |
| If you have any questions, concerns or problems with the ONLINE SHOP payment system please email meat NigelLawton009@Yahoo.com Click here for the Nigel Lawton 009 home Page ___________________________________________ |
| Mail order option from: Nigel Lawton 77 Katherine Way Seaford East Sussex BN25 2XF United Kingdom |
| Electrical pickup kit - a selection of phosphor-bronze strip and small pieces of PCB to build wheel pickups. |
| $12.00 |
| £8.00 |
| €10.00 |
| ¥1000 |
|
|
|
|
 |
|
| $2.00 |
| £1.00 |
| €1.50 |
| ¥200 |
| 1.5mm diameter steel shaft 19mm long suitable for lay shafts etc. |
|
| Sorry this item is out of stock |
| Sorry this item is out of stock |
| 4mm root pulley with 1.5mm shaft hole for use with belts below |
| £0.75 |
| $1.50 |
| €1.00 |
| ¥150 |
|
|
| 6mm root pulley with 1.5mm shaft hole for use with belts below |
| €1.00 |
| $1.50 |
| £0.75 |
| ¥150 |
| $46.00 |
| £29.00 |
| €38.00 |
| ¥4000 |
| Pulley and belts set 1 30 pulleys (6 sizes) 25 belts (5 sizes) 5 shafts (19mm) |
| $60.00 |
| £38.00 |
| €49.00 |
| ¥5000 |
| Pulley and belts set 2 42 pulleys (9 sizes) 25 belts (5 sizes) 5 shafts (30mm) |
 |
 |
 |
 |
