This is a 10V rated coreless DC motor suitable for powering all
but the smallest of 009/HOn30/HOe locos. It will run generally
without problems directly on 12V dc but is provided with a 15 ohm
dropper resistor if you want to protect the motor particularly well.
The shaft is 1mm diameter and this may easily be adapted to
1.5mm with one of my 1.5mm OD 1mm ID shaft adapters - these
can be found on my 'motors' online shop page. The lead wires are
multi-strand, 30mm long.
10 Volt 8mm x 16mm Midi Motor
> Coreless motor - low start voltage and smooth running.
> Runs on 12V dc with resistor provided.
> Low RPM spec - 16,000rpm at 10V.
> Ideal size for boiler mounting in 2mm/3mm scale locos
> Powerful motor for its size - rare earth magnet
> DCC compatible
Please see my ONLINE SHOP for details of pricing & postage & packing
Precision turned mini motor shaft adapter
Length 3mm, OD 1.5mm ID 1.0mm
(loose fit to shaft,threadlock in place).