009/HOn30/HOe Vee Skip Seconds
As the kits described on this site kits are
manufactured by hand a significant percentage
of vee skip (the resin part) 'seconds' are
generated. These usually have an air bubble or
two often resulting in a 'bit missing' but are fine
for lineside use where such holes could be filled
or left as rust perforation.
Most industrial narrow gauge railways have a
dumping ground somewhere for life-expired skips
- the chassis, being fabricated from steel section
rather than thin sheet, often go on longer and
are redeployed either as home-made skip
variants or fitted with new skips and re-used.
When available these may be purchased one
pack per first quality kit ordered for an additional
£1. Check availability with me on email before
sending your order or send £1 in stamps (to be
returned if none available).
manufactured by hand a significant percentage
of vee skip (the resin part) 'seconds' are
generated. These usually have an air bubble or
two often resulting in a 'bit missing' but are fine
for lineside use where such holes could be filled
or left as rust perforation.
Most industrial narrow gauge railways have a
dumping ground somewhere for life-expired skips
- the chassis, being fabricated from steel section
rather than thin sheet, often go on longer and
are redeployed either as home-made skip
variants or fitted with new skips and re-used.
When available these may be purchased one
pack per first quality kit ordered for an additional
£1. Check availability with me on email before
sending your order or send £1 in stamps (to be
returned if none available).
IMPORTANT NOTES:
These items are sold as non-perfect
seconds. Each casting will have one or
more defect typically surface and/or
internal air bubbles and/or be
mis-shapen and/or have pieces broken
off at the edge.
Please note the seconds are only
available from time to time and only
when ordered with at least one first
quality kit.
These items are sold as non-perfect
seconds. Each casting will have one or
more defect typically surface and/or
internal air bubbles and/or be
mis-shapen and/or have pieces broken
off at the edge.
Please note the seconds are only
available from time to time and only
when ordered with at least one first
quality kit.
US Dollar/Euro pricing option:-
3 pack skip seconds $1.50 or €1.50
3 pack skip seconds $1.50 or €1.50
3 pack skip seconds (resin casting only) £1
Postage (P&P) Rates for any quantity:-
Within the UK - £1.50
Anywhere outside the UK - £3
Payment by cheque on a UK Bank or UK postal orders
payable to N. Lawton or ONLINE SHOP please.
Postage (P&P) Rates for any quantity:-
Within the UK - £1.50
Anywhere outside the UK - £3
Payment by cheque on a UK Bank or UK postal orders
payable to N. Lawton or ONLINE SHOP please.
By mail order or online from:
Nigel Lawton
77 Katherine Way
Seaford
East Sussex BN25 2XF
United Kingdom
Email NigelLawton009@Yahoo.com
Nigel Lawton
77 Katherine Way
Seaford
East Sussex BN25 2XF
United Kingdom
Email NigelLawton009@Yahoo.com
Shipping & Handling Rates for any quantity anywhere
outside the UK:-
Option 1
Payment by US Dollar or Euro bills or online - US $6
or €5 S&H.
Option2
Payment by checks on USA based banks in $ and
European banks in € or Wells Fargo international
money orders in US $ payable to N. Lawton - US $16
or €13 S&H.
(Please note the additional handling charge of $10/â
‚¬8 is to cover the £5 bank charge which is incurred
when cashing non-UK £ checks or Wells Fargo
money orders).
outside the UK:-
Option 1
Payment by US Dollar or Euro bills or online - US $6
or €5 S&H.
Option2
Payment by checks on USA based banks in $ and
European banks in € or Wells Fargo international
money orders in US $ payable to N. Lawton - US $16
or €13 S&H.
(Please note the additional handling charge of $10/â
‚¬8 is to cover the £5 bank charge which is incurred
when cashing non-UK £ checks or Wells Fargo
money orders).
| PICTURE PAGES ETC Prototype tipper Pics Vee Tipper Pictures Upcoming Products Customer Gallery LINKS Downloads |
| ONLINE ARTICLES A Modeller's Toolkit Etching For Beginners Whitemetal Casting for Beginners - Theory Whitemetal Casting for Beginners - Practice Resin Casting for Beginners - The Sequel |
Email Contact:-
NigelLawton009@Yahoo.com
NigelLawton009@Yahoo.com