Trax Controls FC-1 and FC-1A
Feedback Controllers
Feedback Controllers
This is a controller which works well with my
range of micro-motor based loco kits. It provides
very smooth control and I am very pleased with
its performance, so pleased that I have taken the
unprecendented step of offering the unit for sale
online. Its also a good controller for a wide
range of commercial mechanisms, although not
necessarily for all mechanism which use coreless
motors such as the Midi and Mini motors in my
own range.
The controller is available either with or without a
DIN connector fitted.
Below is Trax Controls' description of the
controllers.
FC-1 SINGLE TRACK HANDHELD
A “roving� controller with 3 metres of four
core connecting
cable, which allows the operator to move freely
around the layout, whilst maintaining full control.
Features pulse circuitry for very realistic starting,
and excellent slow speed control, essential for
shunting operations!
Plus feedback for virtually constant speed under
all load
conditions.
FC-1A SINGLE TRACK HANDHELD
As FC-1 , but with fitted 6 pin DIN plug, for use
with a 6 pin DIN chassis socket.
range of micro-motor based loco kits. It provides
very smooth control and I am very pleased with
its performance, so pleased that I have taken the
unprecendented step of offering the unit for sale
online. Its also a good controller for a wide
range of commercial mechanisms, although not
necessarily for all mechanism which use coreless
motors such as the Midi and Mini motors in my
own range.
The controller is available either with or without a
DIN connector fitted.
Below is Trax Controls' description of the
controllers.
FC-1 SINGLE TRACK HANDHELD
A “roving� controller with 3 metres of four
core connecting
cable, which allows the operator to move freely
around the layout, whilst maintaining full control.
Features pulse circuitry for very realistic starting,
and excellent slow speed control, essential for
shunting operations!
Plus feedback for virtually constant speed under
all load
conditions.
FC-1A SINGLE TRACK HANDHELD
As FC-1 , but with fitted 6 pin DIN plug, for use
with a 6 pin DIN chassis socket.
Please see my ONLINE SHOP for details of pricing & postage & packing
Other features include:
• FULL OVERLOAD AND SHORT CIRCUIT PROTECTION
with red LED indicator
• GREEN LED TRACK POWER INDICATOR
• HIGH QUALITY TOGGLE DIRECTION SWITCH
with useful centre-off position
• LARGE SPEED CONTROL
for more precise starts and stops.
SPECIFICATIONS:
Output voltage 0 to 12V d.c.
Output current 1.5 amps max.
Dimensions: 45 x 55 x 75mm overall
Input voltage: 14 to 18V a.c. at 1.5 amps.
IMPORTANT NOTE - THIS CONTROLLER ONLY WORK FROM
14-18V AC. IT WILL NOT WORK WITH A DC SUPPLY.
• FULL OVERLOAD AND SHORT CIRCUIT PROTECTION
with red LED indicator
• GREEN LED TRACK POWER INDICATOR
• HIGH QUALITY TOGGLE DIRECTION SWITCH
with useful centre-off position
• LARGE SPEED CONTROL
for more precise starts and stops.
SPECIFICATIONS:
Output voltage 0 to 12V d.c.
Output current 1.5 amps max.
Dimensions: 45 x 55 x 75mm overall
Input voltage: 14 to 18V a.c. at 1.5 amps.
IMPORTANT NOTE - THIS CONTROLLER ONLY WORK FROM
14-18V AC. IT WILL NOT WORK WITH A DC SUPPLY.
| Email Contact:- Nigel@NigelLawton009.com |
| PRODUCTS |
| ONLINE ARTICLES |
| PICTURE PAGES ETC |